Return

AW9963CSR

White LED Driver with PWM Brightness control in Small Package

The AW9963 is dual-channel WLED driver which provides highly integrated solutions for single-cell Li-ion battery powered smartphone backlight. The AW9963 built-in a 2A/40V power MOSFET which can drive up to 2p10s WLED diodes with Li- ion battery power supply. It also integrates two high accuracy and matching current sink regulators which can significantly improve uniformity of backlight, very low feedback voltage and PFM mode at light load bring AW9963 higher efficiency. The AW9963 supports 10kHz to 100kHz PWM input range, can provide low to 0.1% stable current. The AW9963 integrates built-in soft start, as well as overvoltage, overcurrent, and thermal shutdown protections.

Characteristic

l  2.7 to 5.5V Input Voltage Range

l  38V OVP, 1MHz Switching Frequency

l  Innovative CDC Output Drive Technology, Significantly Improve EMI Performance

l  Content Adaptive Backlight Control (CABC)

l  Adaptive Boost Output to WLED Voltages

l  1% Typical Current Matching and Accuracy

l  Supports Low to 0.1% Stable PWM Dimming

l  Up to 9-Bit Dimming Resolution

l  Up to 90% Efficiency

l  PFM Mode at Light Load

l  Built-in WLED Open/Short Protection

l  Over-current and Over-temperature Protection

l  Built-in Soft-start Limits Inrush Current

l  WLCSP-1.36mm x 1.36mm-9B Package


Datasheet

Application note

Product name Type Size Download
AW9963CSR PDF 2.0M
  • Total Max Number
    Control Interface
    Min Duty(%)
    VRef_PW
    Flash Mode
    Switching Frequency (MHz)
    Package (mm)
  • AW9963CSR

    2P10S (2-Channel)
    PWM
    0.1
    -
    -
    1.0
    WLCSP 1.36X1.36-9B
Package form Number of pins Long(mm) Width(mm) Thick(mm) Pin spacing(mm) Heat sink Package drawing
WLCSP 1.36×1.36×0.585-9B 9 1.36 1.36 0.585 0.4 N
Privacy policy | Terms of use

© Copyright 2008-2020 Shanghai Awinic Technology Co., Ltd. |   沪ICP备10011954号  Powered by Yongsy