Return

AW9967DNR

High Efficiency, Support 0.3% PWM Dimming Boost WLED Driver

The AW9967 is a white LED driver with integrated boost converter. With an internal 40V/2A switch FET, the AW9967 drives up a string of up to 10 LEDs in series. The boost converter runs at 1.1MHz fixed switching frequency to reduce output ripple, improve conversion efficiency, and allows for the use of small external components. The default white LED current is set with the external sense resistor R SET , and the feedback voltage is regulated to 200mV, as shown in the typical application. During the operation, a pulse width modulation (PWM) signal can be applied to the CTRL pin through which the duty cycle determines the feedback reference voltage. AW9967 integrates built-in soft-start function to minimize the power supply inrush current. AW9967 also integrates over-current protection, LED open protection and over temperature protection(OTP) to prevent chip from entering abnormal operating conditions.

Characteristic

l  Support 0.3% PWM dimming

l  200mV Reference Voltage in Backlight Mode

l  PWM control input for CABC operation

l  1.1MHz Switching Frequency

l  38V Over-voltage Protection for up to 10 LEDs in Series

l  Innovative CDC Output Drive Technology

l  Significantly Improve EMI Performance

l  2.7V to 5.5V Input Voltage Range

l  Over-current and Over-temperature Protection

l  Built-in Soft-start Limits Inrush Current

l  DFN 2mmX2mm-6L package


Datasheet

Application note

Product name Type Size Download
AW9967DNR PDF 1.48M
  • Total Max Number
    Control Interface
    Min Duty(%)
    VRef_PW
    Flash Mode
    Switching Frequency (MHz)
    Package (mm)
Package form Number of pins Long(mm) Width(mm) Thick(mm) Pin spacing(mm) Heat sink Package drawing
DFN 2.0×2.0×0.75 -6L(A) 6 2.0 2.0 0.75 0.65 Y
Privacy policy | Terms of use

© Copyright 2008-2020 Shanghai Awinic Technology Co., Ltd. |   沪ICP备10011954号  Powered by Yongsy