Return

AW8862CSR

I2S/TDM Input, High Efficiency, 10.25V Boost, 3rd Generation Digital Smart K Audio Amplifier

The AW8862 is an I2S/TDM input, high efficiency digital Smart K audio amplifier with an integrated 10.25V smart boost converter, sound quality enhancement algorithms and speaker protection. Due to its 11.5uV noise floor and ultra-low distortion, clean listening is guaranteed. It can delivers 5.4W (RMS, THD+N=1%) output power into an 8Ω speaker at a battery voltage of 4.2V. The AW8862 integrates a high-efficiency smart boost converter as the Class-D amplifier supply rail. The output voltage of boost converter can be adjusted smartly according to the input amplitude, which extremely improves the efficiency without clipping distortion. The AW8862 features AWINIC proprietary AGC algorithm that prevents clipping noise and improves sound quality. The AW8862 supports speaker and receiver 2-in-1 applications. In the receiver application, it connects VDD directly to the Class-D amplifier power supply. The AW8862 features high RF suppression and eliminates TDD noise completely benefited from the digital audio input interface. General settings are communicated via an I2C-bus interface, and the device address is configurable.

Characteristic

l  Supports Speaker Protection Algorithm

l  Smart Boost with total efficiency up to 85%

l  Supports Speaker, Receiver 2-in-1 application

l  High RF noise suppression, eliminate the TDD noise completely

l  Low noise: 11.5 μV

l  THD+N: 0.02%

l  Supports 6Ω Speaker

l  Extensive Pop-Click Suppression

l  Volume control(from -96dB to 0dB)

l  I2S/TDM interface

n  I2S, Left-Justified and Right-Justified

n  Supports four slots TDM

n  Input Sample Rates from 8kHz to 96kHz

n  Data Width: 16, 20, 24, 32 Bits

l  I2C-bus control interface(400kHz)

l  Power Supplies

n  VDD3.2V-5.5V

n  DVDD: 1.65V~1.95V

l  Short-Circuit Protection, Over-Temperature Protection, Under-Voltage Protection and Over-Voltage Protection

l  WLCSP 2.47X2.47-36B package

Datasheet

  • Voltage(V)
    Boost Type
    R=8Ω THD=1%
    Protection
    Receiver
    Package (mm)
  • AW8862CSR

    10.25
    Boost
    5.6W@4.2V
    SKTune
    WLCSP 2.47X2.47-36B
  • AW8898QNR

    9.5
    Boost
    5.2W@4.2V
    SKTune
    WBQFN 3.5X3.5-24L
Package form Number of pins Long(mm) Width(mm) Thick(mm) Pin spacing(mm) Heat sink Package drawing
WLCSP 2.47×2.47×0.615-36B 36 2.47 2.47 0.615 0.4 N
Privacy policy | Terms of use

© Copyright 2019 Shanghai awinic Technology Co.,Ltd |   沪ICP备10011954号  Powered by Yongsy