Return

AW3210ADNR

1A Li-ion Battery Charger Integrated with Protective PMOSFET

AW3210A is a highly integrated Li-Ion battery charger. AW3210A continuously detects the input voltage, if V IN exceeds the threshold voltage and lasts longer than 100ns, the internal power P-MOSFET turned off, CHRIN pulled down. AW3210A Built-in current limiting protection circuit, the charging current is limited to a safe range. AW3210A possesses the specific K-Charge TMtechnology, the output current can be adjusted smartly according to the chip temperature to ensure safety during the entire charging process. AW3210A integrates the charging P-MOSFET, eliminating  the  need  for  external  charging P-MOSFET and Schottky Diode among a phone charging system. And the reverse current blocking function has been designed in AW3210A, when the CHRIN voltage drops below the OUT, charging P-MOSFET turned off, preventing current draining from the lithium-ion battery into AW3210A. AW3210A is available in DFN 3×3-10L package.

Characteristic

l  Input Over-voltage Protection

l  Input Current Limit Protection

l  Output Short to Ground Protection

l  1A Charging PMOSFET

l  Specific K-ChargeTM: Junction Temperature Based Dynamic Output Current

l  Over Temperature Protection

l  ESD Protection ±8kV(HBM)

l  DFN 3mm×3mm-10L Package

Datasheet

Application note

Title Type Size Date Download
DS_AW3210A_EN_V1.0_1A Li-ion Battery Charger Integrated with Protective PMOSFET.pdf PDF 1.3M 2019-01-11
  • Control Interface
    Operation Mode
    Max Charge Current (A)
    VOREG
    OTG
    Package (mm)
Package form Number of pins Long(mm) Width(mm) Thick(mm) Pin spacing(mm) Heat sink Package drawing
DFN 3.0×3.0×0.75 -10L 10 3.0 3.0 0.75 0.5 Y
Privacy policy | Terms of use

© Copyright 2019 Shanghai awinic Technology Co.,Ltd |   沪ICP备10011954号  Powered by Yongsy